Wintv Hvr 950q Mac Software Eyetv Software Download

by



To install the WinTV v8.5 application. Step 1: Download the WinTV v8.5 installer by clicking the download button above. The WinTV v8.5 Installer is normally saved in the Download folder on your PC Step 2: Run wintv85setup from the Download folder on your PC.Halfway through the installation, a message will pop up asking for you to enter the Activation Code.

  • WinTV v10 installation instructions. The WinTV v10 will install Windows drivers before installing the WinTV v10 application. Step 1: Download the WinTV v10 installer by clicking the download button above. The WinTV v10 installer is normally saved in the Download folder on your PC Step 2: Run wintv10setup from the Download folder on your PC.If you see the message 'Windows Protected Your PC.
  • WinTV v10 installation instructions. The WinTV v10 will install Windows drivers before installing the WinTV v10 application. Step 1: Download the WinTV v10 installer by clicking the download button above. The WinTV v10 installer is normally saved in the Download folder on your PC Step 2: Run wintv10setup from the Download folder on your PC.If you get a Windows message 'Windows protected your.

Note: If you have run HCWCLEAR, you must reboot your PC and leave the WinTV-HVR-950 installed. After a reboot you will see the Found New Hardware Wizard installation message, hit Cancel. then continue below.

Note: to use the WinTV-HVR-950 with Microsoft's Vista Media Center application, you need the WinTV-HVR driver and SoftMCE.

WinTV v8 application and TV tuner driver download package

This is WinTV v8, which can be used if you have a WinTV v7 CD-ROM. If you have a WinTV v8 Activation Code, you can upgrade to WinTV v8.5 at no cost.

Installation notes for WinTV v8:

WinTV v8 is primarily for the Hauppauge WinTV-HVR-850, WinTV-HVR-950, Colossus (not Colossus 2), HD PVR model 1212, WinTV-HVR-1150, WinTV-HVR-1500 or WinTV-HVR-1600. WinTV v8.5 does not support these products.

Activation for this version of WinTV v8 is done with your WinTV v7 CD-ROM or WinTV v8.5 Activation Code.

WinTV v10 Activation Code: If you do not have a WinTV v8/8.5 Activation Code, you can purchase the new WinTV v10 Activation Code on the Hauppauge webstore for $12.95. This can be used with all products supported by WinTV v8 and WinTV v8.5

WinTV v8 installer
For Windows 10, 8, and 7

Wintv Hvr 950q Mac Software Eyetv Software Download

File name: wintv8setup_35167.exe | File size: 108 MB | Date: June 23, 2017
Release notes | Backup download site

This download is a complete installation package, including drivers for supported WinTV products plus the WinTV v8 application and utilities.

To install the WinTV v8 application

  • Download the WinTV v8 installer to your PC. After downloading this file, it's normally saved in the Download directory on your PC
    Note: If you see a message Run or Save?, click Save.
  • Have your WinTV Activation Code ready or insert your original valid WinTV v7 CD
  • Run wintv8setup from the Download directory on your PC
  • At Activation required, click Check WinTV CD if you have a WinTV v7 CD or click Enter Serial Number and then enter your WinTV Activation code.

This will complete the driver and application installation for your WinTV.

To install WinTV v8 on a PC or laptop without a CD-ROM drive

If your PC or laptop does not have a CD-ROM drive, do the following:

  • At the conclusion of the installation a dialog box will pop up saying 'Activation required'
  • Click Enter Product Code
  • You will find the Product code on your WinTV v7 Installation CD
  • Enter the Product code including dashes and dots

To find your Product Code

Look at the following guide for finding your product code

Note: If you have a WinTV v7.2 CD-ROM with Extend, the latest version of WinTV v8 with Extend will also be installed.

Setting up your TV tuner in Windows 7 Media Center

Windows Media Center remote control receiver/blaster configuration utility

Use this utility to enable or disable the built-in IR receiver/blaster hardware on the WinTV-HVR-1850 and WinTV-HVR-2250 for use with Windows Media Center. You would disable the built-in IR receiver/blaster if you are using an external USB attached Windows Media Center remote control.

To use this tool:

  • Download, unzip and install the Hcwcirconfig tool
  • After installing the Hcwcirconfig tool, run the program. The tool will be located in Start / All Programs / Hauppauge WinTV / HCWCIRConfig Tool
  • To configure as a Windows Media Center remote control, put a check in the box labeled Hauppauge Consumer Infrared Receiver click OK – Save Changes.
  • Your computer must be restarted for the changes to take effect.

Name: hcw_circonfig_tool_1.2.28165.zip
Name: 322KB
Name: 6/16/2010

Bug fixes for the Windows Media Center 'Low bit rate' error message

Microsoft has released Windows Media Center patches for the 'Low bit rate' error message.
Click to view the information from Microsoft.

Download Free Wintv Software

Remapping clear QAM channels in Windows 7 Media Center

WinTV Digital Signal Strength Indicator

The WinTV Digital Signal Strength indicator displays information about the quality of the digital TV channel you are watching. This application is used with the WinTV v10, 8 and v7 applications.

The WinTV Digital Signal Strength must be used with one of the Hauppauge WinTV applications. It cannot be used stand alone.

Click here for instructions on using this application.

IR Remote control application

Remote control applet. After you run this applet, an icon will appear in your Windows device tray showing that the Hauppauge remote control is active.

Name: 2.71.33113_IR32.exe
Size: 450KB
Updated: April /2015

WinTV-Scheduler update for WinTV version 6

This TV program scheduler for WinTV version 6 allows 'background recording' on dual tuner WinTV products.

Name: sched25_26071.exe
Size: 3.8 MB
Updated: March 11, 2008

Soft MCE driver

This file is required for analog TV in Windows Media Center.

Name: softmce_setup.exe
Size: 2.2 MB
Updated: 4/14/2010

Is a free Personal Video Recorder (PVR) and Media Centre application for Microsoft Windows.

SnapStream Beyond TV™ 4 : 'Proving that a PC can rival TIVO' !

  • Supports the latest Hauppauge TV tuners.
  • Record more than one show at the same time or watch one while recording another with multi-tuner support
  • Record an entire TV series Record one show, every episodes, or only new episodes of your favorite show
  • Enjoy the full screen interface Choose shows and setup recordings from the comfort of your couch
  • Easily find shows using the integrated Electronic Program Guide (EPG)
  • Record and watch HDTV shows with over-the-air HD support on the WinTV-HVR-1250
  • Skip commercials with SmartSkip™
  • Find shows faster with the new browse by category feature, or search by title or keyword
  • No subscription fees
  • Schedule recordings away from home via the Internet or a web-ready phone

What Operating Systems are supported by the WinTV-HVR-950?

  • Microsoft Windows 10, 8, 7 (32 and 64 bit)
  • Windows Vista (all versions), 32-bit and 64-bit
  • Windows® XP, XP Pro or Windows XP Media Center Edition, with Service Pack 2 (or greater)

System Requirements

  • Minimum processor recommended:
  • 2.2 GHz P4 or 1.8 GHz Centrino or equivalent (minimum).
  • 2.8 GHz processor for analog TV recording with MPEG-2 (minimum).
  • Graphics display adapter with 64MB of memory (minimum).
  • Sound card or system.
  • USB 2.0 port (will not work with USB 1.1).
  • CD-ROM drive (for Software installation).

Can I use the WinTV-HVR-950 with Media Center?

Yes, the WinTV-HVR-950 can be used in Windows XP MCE 2005, Vista Media Center or WIndows 7 Media Center. Simply download and install the latest MCE Kit from the Hauppauge website, which will install the driver and necessary 'Hauppauge MCE Soft Encoder'. Under Windows 7 only the driver is required, the Soft Encoder is included with the OS.

NOTE: You must set up an analog TV tuner in Media Center first before you can proceed to set up a digital tuner.

What type of channels will I receive with the WinTV-HVR-950?

NTSC Analog CableTV or over-the-air analog TV: You can use your cable TV from the wall to connect to the WinTV-HVR-950 and receive all of your basic Cable TV channels. You can also use a roof top antenna to receive 'over-the-air' TV.

ATSC over-the-air digital TV: Supports all ATSC formats, up to the high definition 1080i format!

NOTE: For ATSC digital TV, a rooftop/out door antenna is recommended for optimal results/signal strength.

Analog channels are MONO audio only.

Digital channels are STEREO.

Can I get HD with the WinTV-HVR-950 through my Cable or Satellite box?

No. The WinTV-HVR-950 has an ATSC over-the-air digital TV tuner built-in and supports all ATSC formats, up to the high definition 1080i format . The WinTV-HVR-950 will support ATSC broadcasts that are currently being transmitted over-the-air. It will not be able to decode HD broadcasts that come through your cable or satellite box. QAM is not supported.

What type of recordings can I make with the WinTV-HVR-950?

Using the WinTV 7 application the WinTV-HVR-950Q, will record in a transport stream (TS)
For ATSC and Clear QAM digital TV recordings, the recording format and bit rate is exactly the same as the broadcast format (i.e. ATSC 1080i is recorded at 1080i).
For NTSC analog cable TV recordings, our SoftPVR is used to create Transport Stream files (TS)

Note: TS files can be converted to MPEG files using options in the WinTV 7 configuration menu.

Note: The WinTV 6 application recording are in MPEG format for both digital and analog.

Note: Not all recordings made with ATSC/QAM signals are DVD compliant.

Can I record one show while watching another with the WinTV-HVR-950?

No. The WinTV-HVR-950 will only be able to record the program that is being viewed using the supplied software.

You will not be able to watch a digital channel and record an analog channel simultaneously or vice versa due to the fact there is only a single tuner on the WinTV-HVR-950.

SStream DShowError: 'Create Filters CLSID_MainConceptMPEGEncoder Class Not Registered (0x80040154)' error when attempting to record?

If using the WinTV 6 application this indicates that the 'Soft PVR' is not installed. To verify Soft PVR installation, look under control panel/add remove programs and you will see the Hauppauge WinTV Soft PVR. To reinstall SoftPVR, install the SoftPVRUpdate.exe from your WinTV CD ROM (located in the SoftPVR folder).

(Note: If a hardware encoder model WinTV is already installed on your system, this will prevent the SoftPVR from installing properly. In order to install SoftPVR in this case, go to device manager and temporarily disable the drivers for the WinTV hardware encoder product. Install the SoftPVR and once completed, you may re-enable the hardware encoder in the device manager.

Black video window or choppy video when watching a digital TV channel

If you are watching a digital TV channel and you see choppy video, no audio or a black screen, then it is possible your PC is not fast enough to decode and play the digital TV channel you are watching. Please verify that your system meets the minimum requirements for using the HVR-950Q

Digital TV, especially ATSC high definition digital TV, is very CPU intensive. Many graphics cards have special built-in hardware to speed up decoding of high definition TV channels.

On graphics cards without special video decoding features, you can often improve the playback performance by using the Video Renderer settings located in the settings menu of WinTV 7. To open the setting menu click on the “gear” button located in the lower left of the WinTV 7 screen.

The default mode is EVR. The other modes are VMR9, VMR7 and Overlay. Each mode uses a different process to render video. Try each mode and use the one which gives you the best results. To use hardware acceleration put a check in the box “use hardware acceleration when possible. This will allow your graphics system to use hardware acceleration for video decode. Note: graphics hardware acceleration does not work on all systems. After making a change in video rendering settings Wintv must be restarted to take effect.

Software

If you are using WinTV 6 then the render options are part of a separate program called Primary. Changes in the Primary applet must be made with the WinTV application closed. Open the Primary program by going to Start – All Programs – Hauppauge WinTV – Primary. After making changes close the Primary applet and open the WinTV application.

Where can I find the optional AV cable?

The optional AV cable will be available through our Sales dept . Please contact sales@hauppauge.com or look on our WEB store for more information on purchasing this optional cable.

WinTV crashes on a Dell Vostro desktop

If you experience a crash on the WinTV application when running on a Dell Vostro computer, check to make sure the speakers are plugged in. If speakers are not plugged in, the Dell Vostro disables the internal sound card. The WinTV application requires a sound card to be enabled to operate correctly.

How do I enable my remote control so it will work with the WinTV-HVR-950?

The IR software should be installed by default. To check look for a small remote control icon in the Windows task bar on the lower right. IF it is not present you can reinstall Wintv from the installation CDROM or download IR32.EXE from our support web site. The remote control must also have “line of sight” with the HVR-950Q. The IR receiver of the HVR-950Q is the round bulb on the side of the unit.

I receive a 'Low bit rate' error message when using Windows Media Center in Windows 7.

Microsoft has released Windows Media Center patches for the 'Low bit rate' error message.
Click to view the information from Microsoft.

WinTV v7 does not open or opens and then disappears?

This can be caused by a corrupt Channel database so you will need to uninstall and reinstall. First you need to go to start, all programs, Hauppauge Wintv and in that folder run
“uninstall Wintv7” (or remove Wintv7 using control panel 'add/remove programs) then you need to remove the backup channel database.

Windows Vista, 7 and 8 go to C:program data ( this folder is a hidden folder so if you do not see it you need to “show hidden folders “ in your search
Options) once you can get to this folder you will see a folder label “Hauppauge” delete this folder.

Windows XP go to C:documents and settingsall usersshared documentsapplication data ( this folder is a hidden folder so if you do not see it you need to “show hidden folders “ in your search Options) once you can get to this folder you will see a folder label “Hauppauge” delete this folder.

Then download the latest version of Wintv7 located in the support section of the website and reinstall (note: you must have your original CD to validate the download.)

Hauppauge WinTV is a freeware software app filed under internet tv software and made available by Hauppauge for Windows.

The review for Hauppauge WinTV has not been completed yet, but it was tested by an editor here on a PC and a list of features has been compiled; see below.

If you would like to submit a review of this software download, we welcome your input and encourage you to submit us something!

Watch television from your video capture card

Wintv Hvr 950q Mac Software Eyetv Software Downloads


WinTV lets you control more than one WinTV device in your system. With the new 'multi' feature, if you have dual tuners in your PC, you can have live TV from both on the screen at the same time.

With subtitles, WinTV lets you display subtitles from your digital TV program on top of the TV window. To watch TV full screen, double your LEFT mouse button again. To exit full screen, double your LEFT mouse button again or hit the ESC key.

Hauppauge WinTV is software which can capture video from input devices.

Features and highlights


  • A new, clear and intuitive interface
  • Digital parental control (North America)
  • Closed captions (North America)
  • Single configuration and scanning pop up menu
  • High Definition TV and video support (selected models)
  • Integrated TV recording scheduler
  • Instant time shift and recording
  • Multiple tuner support
  • Built-in video player, which supports a wide variety of video formats
  • Logical channel numbers
  • Signal strength monitor for digital TV channels

Hauppauge WinTV on 32-bit and 64-bit PCs

This download is licensed as freeware for the Windows (32-bit and 64-bit) operating system on a laptop or desktop PC from internet tv software without restrictions. Hauppauge WinTV 8.5 is available to all software users as a free download for Windows 10 PCs but also without a hitch on Windows 7 and Windows 8.

Compatibility with this software may vary, but will generally run fine under Microsoft Windows 10, Windows 8, Windows 8.1, Windows 7, Windows Vista and Windows XP on either a 32-bit or 64-bit setup. A separate x64 version may be available from Hauppauge.

Filed under:

Wintv Hvr 950 Software Download

  1. Hauppauge WinTV Download
  2. Freeware Internet TV Software